|
Laminators for ID Cards up to Menu Size Items using up to 10 mil Laminates! |
||
|
|
||
![]() |
The L5000T
is mainly used to laminate ID Cards and other small items up to
3-1/2" wide. Includes a thermometer and adjustable temperature. Laminator has
four rollers. Click for Specifications. |
See Butterfly Laminates and
Our Price |
| L5000T | ||
|
|
||
![]() |
The L6000T
will
laminate items up to 9" wide. Includes a
thermometer and adjustable
temperature. Laminator has
four rollers. Click for Specifications |
See our
Our Price |
| L6000T | ||
|
|
||
![]() |
The L7000T
will
laminate items up to 12" wide. Includes a
thermometer and adjustable
temperature. Laminator has
four rollers. Click for Specifications |
See our Menu |
| L7000T | ||
|
|
||
|
|
||
Specifications
● Heavy-duty professional laminators are perfect for any office, business, or commercial use. The advanced design heats and compresses the lamination. All models utilize four high quality rollers. ● All models are identical except for the width
and power consumption.
The L5000T is mainly used for ID Cards and other
small items. The L6000T will laminate small items and letter and
legal size items. The L7000T can laminate all of the above items as
well as menu size items. ● The Main Power Switch turns power On and Off and illuminates when ON. ● The Motor RUN / STANDBY Switch controls the motor, eliminating excess wear to the motor and rollers, while maintaining the temperature for immediate use when set to STANDBY. This dual function switch also illuminates to show when unit is up to set temperature. ● Fan cooled with extruded aluminum heat sink to facilitate heat removal from laminated items and help maintain the flatness of such items. ● Laminating Speed is approximately 33" per minute. ● Laminate using up to 10 mil laminates (each side). ● Warm-up time is 3 to 5 minutes. By keeping the Motor Switch set to STANDBY, your laminator stays at temperature for immediate use. ● All Models operate on 115 VAC, 50/60 HZ. ● Model L6000T: 115 VAC, 4.4 amps. ● Model L7000T: 115 VAC, 5.4 amps. ● All Models are also available to run on 220-240VAC 50/60 HZ. Call for more information. ● Brushless Gear Motor ● Permanently lubricated bronze roller bearings. ● Four precision ground high temperature silicone rollers. ● Adjustable temperature. ● UL Listed, CSA Approved. ● Use of a carrier is recommended and carriers are included with all ID Supply laminate orders. A carrier keeps your laminator rollers and heaters clean. ● These laminators come with a manufacturer's 5 Year Warranty. Manufacturer's electrical and operating specifications subject to change. |
|


